Category: 6274-22-2

Adding a certain compound to certain chemical reactions, such as: 6274-22-2, name is 4-Amino-N-methylbenzamide, belongs to amides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6274-22-2, Recommanded Product: 6274-22-2

Thiophosgene (1.13 ml, 1.1 eq) is added dropwise to a solution cooled down to 0 C., of 4-amino-N-methylbenzamide (2 g, 1 eq) and triethylamine (5.6 ml, 3 eq) in tetrahydofuran (260 ml). The mixture is stirred for 30 minutes at 0 C. then the cold bath is removed and stirring is continued for another 30 minutes. Water (100 ml) and diethyl ether (250 ml) are added to the mixture. After decantation and extractions, the organic phases are combined, washed with salt water, dried over Na2SO4 then concentrated under reduced pressure at 40 C. The solid obtained is recrystallized from a dichloromethane/petroleum ether mixture (2.2 g; 86% yield). NMR (1H, 400 MHz, DMSO-d6): delta 2.77 (d, 3H), 7.51 (AB, 2H), 7.88 (AB, 2H), 8.52 (m, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Amino-N-methylbenzamide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Poitout, Lydie; Brault, Valerie; Sackur, Carole; Roubert, Pierre; Plas, Pascale; US2006/173036; (2006); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

These common heterocyclic compound, 6274-22-2, name is 4-Amino-N-methylbenzamide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C8H10N2O

Example 27; 4-({4-[(1 ,1 -Dimethylethyl)amino]-1 W-pyrrolo[2,3-d]pyrimidin-2-yl}amino)-lambda/-met hylbenzamide trifluoroacetate; lambda/-(1 J-dimethylethyl)-2-iodo-7-[(4-methylphenyl)sulfonyl]-7/-/-pyrrolo[2,3-c(]pyrimidin- 4-amine (O.betammol) was dissolved in DMF (16ml). Bis(dibenzylideneacetone) palladium (10mol%, Aldrich), 2-dicyclohexylphosphino-2′-(lambda/,lambda/-dimethylamino) biphenyl (15mol%), cesium carbonate (0.3mmol) and 4-amino-lambda/-methylbenzamide (0.15mmol) were combined with an aliquot of this solution (2ml). The reaction was heated at 800C for 2h, allowed to cool, filtered through Celite and concentrated. The reaction was dissolved in methanol (1.5ml), treated with sodium methoxide in methanol (0.5M, 500mul), stirred at 700C for 2h and left to stand at room temperature overnight. The reaction was heated for a further 5h, concentrated and purified using MDAP. The fractions containing product were evaporated to dryness to give title compound (3mg). LC/MS; Rt 2.58min, MH+ 339.

The synthetic route of 4-Amino-N-methylbenzamide has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GLAXO GROUP LIMITED; WO2007/42298; (2007); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Synthetic Route of 6274-22-2, A common heterocyclic compound, 6274-22-2, name is 4-Amino-N-methylbenzamide, molecular formula is C8H10N2O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solution of alpha-ketoacids (1.0 eq., 0.5 M) in DCM was added a drop of DMF at room temperature followed by the addition of oxalyl chloride (1.2 eq.). The resulting mixture was stirred at this temperature until no gas was released. The reaction mixture was subsequently cooled to 0oC followed by the addition of amine (1.2 eq.) and Et3N (2.0 eq.). The resulting reaction mixture was warmed to room temperature and stirred for 4 h. After addition of water (5 mL), the mixture was washed with 1N HCl and water respectively and dried over Na2SO4. Purification by flash column chromatography afforded the desired alpha-ketoamides.

The synthetic route of 6274-22-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Wu, Jia-shou; Jiang, Hua-jiang; Yang, Jian-guo; Jin, Zheng-neng; Chen, Ding-ben; Tetrahedron Letters; vol. 58; 6; (2017); p. 546 – 551;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 6274-22-2,Some common heterocyclic compound, 6274-22-2, name is 4-Amino-N-methylbenzamide, molecular formula is C8H10N2O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 5 Method H: 4-(4-(5,6,7,8-tetrahydro-7,7-dimethyl-4-oxo-4H-thiazolo[5,4-c]azepin-2-yl)pyridin-2-ylamino)-N-methylbenzamide (I-5) 2-(2-chloropyridin-4-yl)-5,6,7,8-tetrahydro-7,7-dimethylthiazolo[5,4-c]azepin-4-one (70 mg, 1.0 Eq.), 4-amino-N-methyl-benzamide (41 mg, 1.2 Eq.), NaOtBu (61 mg, 2.8 Eq.), Pd(OAc)2 (5 mg, 0.1 Eq.) were suspended/dissolved in dry toluene and degassed (vacuum/N2 cycles*5). 2-Di-tert-butylphosphino)biphenyl (143 mg, 0.2 Eq.) was then added. The resultant mixture was then refluxed overnight. A further portion of NaOtBu (61 mg, 2.8 Eq.), Pd(OAc)2 (5 mg, 0.1 Eq.) and 2-(di-tert-butylphosphino)biphenyl (14 mg, 0.2 Eq.) were added, followed by dry dioxane (0.5 mL). The resultant mixture was refluxed for a further night. The reaction mixture was allowed to cool to RT, partitioned between EtOAc/MeOH (3:1)/NH4Cl, and then extracted into EtOAc/MeOH (3:1) (3*50 mL). The combined organic layers were washed with brine (1*20 mL), dried over Na2SO4, filtered and concentrated under reduced pressure. Purification was achieved using column chromatography (10% MeOH/90% DCM) to obtain the title compound as a bright yellow powder (18.6 mg, 19% yield); 1H NMR (DMSO D6) 1.0 (6H, s), 2.8 (3H, d), 3.0 (2H, s), 3.0 (2H, m), 7.3 (1H, m), 7.5 (1H, s), 7.8 (4H, s), 8.2 (1H, m), 8.3 (2H, m), 9.6 (1H, s); LC/MS M+1 (obs.) 422.20; LC/MS M-1 (obs.) 420.30.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Amino-N-methylbenzamide, its application will become more common.

Reference:
Patent; Vertex Pharmaceuticals Incorporated; US2009/281082; (2009); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 6274-22-2,Some common heterocyclic compound, 6274-22-2, name is 4-Amino-N-methylbenzamide, molecular formula is C8H10N2O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: CS2 (50 mL) was added to a stirring mixture of DABCO (30 mmol) and amine (10 mmol) in acetone (10 mL). The resulting mixture was further stirred at room temperature to achieve dithiocarbamate, and the process of the reaction was monitored by TLC. After completion of the reaction, the solution was filtered and the solid was washed with acetone. After it was dried in an infrared-ray oven, the salt was dissolved in dried CHCl3 (10 mL) and the mixture was chilled to 0-5 C in an ice bath. BTC (1010 mg, 3.4 mmol), dissolved in CHCl3 (5 mL), was added dropwise for 30 min with constant stirring. The reaction mixture was then allowed to reach room temperature and stirred for a further 4 h. Triethylenediammmonium hydrochloride was filtered off, and the filtrate was evaporated in vacuo to afford the desired isothiocyanate in good purity. All products were identified by comparison with authentic samples.

The synthetic route of 6274-22-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Liu, Pengfei; Li, Chunyan; Zhang, Jingwei; Xu, Xiaoyong; Synthetic Communications; vol. 43; 24; (2013); p. 3342 – 3351;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 6274-22-2, name is 4-Amino-N-methylbenzamide, belongs to amides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6274-22-2, name: 4-Amino-N-methylbenzamide

Thiophosgene (1.13 ml, 1.1 eq) is added dropwise to a solution cooled down to 0 C., of 4-amino-N-methylbenzamide (2 g, 1 eq) and triethylamine (5.6 ml, 3 eq) in tetrahydofuran (260 ml). The mixture is stirred for 30 minutes at 0 C. then the cold bath is removed and stirring is continued for another 30 minutes. Water (100 ml) and diethyl ether (250 ml) are added to the mixture. After decantation and extractions, the organic phases are combined, washed with salt water, dried over Na2SO4 then concentrated under reduced pressure at 40 C. The solid obtained is recrystallized from a dichloromethane/petroleum ether mixture (2.2 g; 86% yield). NMR (1H, 400 MHz, DMSO-d6): delta 2.77 (d, 3H), 7.51 (AB, 2H), 7.88 (AB, 2H), 8.52 (m, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Amino-N-methylbenzamide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Poitout, Lydie; Brault, Valerie; Sackur, Carole; Roubert, Pierre; Plas, Pascale; US2006/173036; (2006); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

A common heterocyclic compound, 6274-22-2, name is 4-Amino-N-methylbenzamide, molecular formula is C8H10N2O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 6274-22-2.

Step 1To a solution of 2, 4-dichloropyridine (0.500 g, 3.39 mmoL) and 4-amino-N- methylbenzamide (0.510 g, 3.39 mmoL) in dimethylacetamide (1 mL) was added cesium carbonate (1.6 g, 5.08 mmoL) and the reaction mixture was degassed for 15 min. Pd2(dba)3 (0.154 g, 0.169 mmol) and BINAP (105 mg, 0.169 mmol) were added and the reaction mixture was irradiated in the microwave at 120 C for 1 h. Then reaction was quenched with water and extracted with EtOAc (2 x 50 mL). The organic extracts were washed with brine, dried over anhydrous sodium sulfate and concentrated under reduced pressure. Purification by silica gel column chromatography provided 3-((4-chloropyridin-2-yl)amino)-N-methylbenzamide (0.300 g, 38%) as a solid. Observed mass (M+l): 262.1

The synthetic route of 4-Amino-N-methylbenzamide has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AMGEN INC.; BREGMAN, Howard; BUCHANAN, John, L.; CHAKKA, Nagasree; DIMAURO, Erin, F.; DU, Bingfan; NGUYEN, Hanh, Nho; ZHENG, Xiao, Mei; WO2011/103196; (2011); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

6274-22-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 6274-22-2 name is 4-Amino-N-methylbenzamide, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Example 33-(7-(3,4-Dimethoxyphenylamino)thiazolo[5,4-d]pyrimidin-5-yl)-N-(4-(methylcarbamoyl)phenyl)benzamide Procedure:A solution of 3-[7-(3,4-dimethoxy-phenylamino)-thiazolo[5,4-d]pyrimidin-5-yl]-benzoic acid (170 mg, 0.41 mmol) in 10 mL of DMF were added 4-amino-N-methyl-benzamide (81 mg, 0.54 mmol), HATU (205 mg, 0.54 mmol) and DIEA (79 mg, 0.61 mmol) at room temperature. Then the reaction mixture was stirred at room temperature for 16 hours. The solvent was evaporated to give a solid as a crude product. It was purified by preparative HPLC (Gemini 5u C18 150¡Á21.2 mm; inject volume: 3 ml/inj, flow rate: 20 ml/min; wavelength: 214 nm and 254 nm; the gradient conditions are: 40% acetonitrile/60% water (0.1% TFA V/V) initially, and then proceed to 70% acetonitrile/30% water (0.1% TFA V/V) in a linear fashion after just 9 min.) to give 3-(7-(3,4-dimethoxyphenylamino)thiazolo[5,4-d]pyrimidin-5-yl)-N-(4-(methylcarbamoyl)phenyl)benzamide (66 mg, 29.7%) as a yellow solid. 1H NMR (300 MHz, DMSO): delta 10.66 (s, 1H), 10.21 (s, 1H), 9.39 (s, 1H), 8.93 (s, 1H), 8.59 (d, 1H, J=7.2 Hz), 8.38-8.37 (m, 1H), 8.05 (d, 1H, J=8.7 Hz), 7.89-7.82 (m, 6H), 7.71-7.68 (m, 12H), 7.54-7.50 (m, 1H), 6.97 (d, 1H, J=8.7 Hz), 3.78 (s, 3H), 3.72 (s, 3H), 2.78 (d, 1H, J=3.9 Hz). LC-MS: 541.1 [M+H]+, tR=1.72 min. HPLC: 96.60% at 214 nm, 97.75% at 254 nm, tR=6.68 min.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Amino-N-methylbenzamide, and friends who are interested can also refer to it.

Reference:
Patent; Hermann, Johannes Cornelius; Lowrie, JR., Lee Edwin; Lucas, Matthew C.; Luk, Kin-Chun Thomas; Padilla, Fernando; Wanner, Jutta; Xie, Wenwei; Zhang, Xiaohu; US2012/252777; (2012); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics