Category: 193751-54-1

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 193751-54-1, name is tert-Butyl cyclopent-3-en-1-ylcarbamate, A new synthetic method of this compound is introduced below., Recommanded Product: tert-Butyl cyclopent-3-en-1-ylcarbamate

product was obtained which was recrystallised twice from heptane. After crystallization, 1.01 g of syn epoxide was obtained in the form of white needles. The mother liquors were subjected to chromatography (silica, toluene/EtOAc = 9:1 – 7:1) to yield 3.51 g of anti epoxide in the form of a white amorphous solid. [0058] Syn epoxide: is NMR (400MHz, DMSO-d6, delta, ppm, characteristic signals): 1.36 (s, 9H), 6.79 (d, 1H, J=8Hz), 1.47 (dd, 1H, J=8Hz and 14Hz), 2.17 (dd, 1H, J=8Hz and 14Hz), 3.44 (s, 2H), 3.54 (m, 1H). MS-ESI+ (m/z): 200 (M + H). TLC: toluene/EtOAc = 3:1, Rf = 0.4. [0059] Anti epoxide: 1H NMR (400MHz, DMSO-d6, delta, ppm, characteristic signals): 1.35 (s, 9H), 1.78 (d, 2H, J=15Hz), 1.98 (dd, 1H, J=8Hz and 15Hz), 3.51 (s, 2H), 3.89 (q, 1H, J=8 and 16Hz), 5.70 (d, 1H, J=8Hz). MS-ESI+ (m/z): 200 (M + H). TLC: toluene/EtOAc = 3:1, Rf = 0.45.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Nabriva Therapeutics AG; Mang, Rosemarie; Thirring, Klaus; Heilmayer, Werner; EP2433926; (2012); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Related Products of 193751-54-1, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 193751-54-1 as follows.

To a solution of N-l-Boc-amino-3-cyclopentene (1.94 g, 10.58 mmol) in a mixture of acetone (63 mL)/water (7.8 mL) (8: 1) at room temperature was added N-methyl morpholine N-oxide (2.48 g, 21.16 mmol). After 2 minutes osmium tetroxide (4% in water) (3.37 mL) was added and the resulting mixture stirred at room temperature for 23h. The reaction mixture was then quenched by the addition of aqueous Na2S203 (0.2 M, 25 mL) and extracted with CH2C12 (2 x 50 mL). The combined organic extracts were washed with aqueous Na2S203 (0.2 M, 10 mL), dried (MgS04), filtered and evaporated in vacuo. The crude material was purified by flash chromatography eluting with EtOAc (17 – 100 %) in heptane to give a mixture of the title compounds as a yellow solid (1.31g, 57 %).

According to the analysis of related databases, 193751-54-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; BROMIDGE, Steven; BURCH, Jason; HEIFETZ, Alexander; KRULLE, Thomas; MONTALBETTI, Christian A.G.N.; PEI, Zhonghua; PEREZ-FUERTES, Yolanda; TRANI, Giancarlo; (223 pag.)WO2016/1341; (2016); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Reference of 193751-54-1, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 193751-54-1 as follows.

To a solution of N-l-Boc-amino-3-cyclopentene (1.94 g, 10.58 mmol) in a mixture of acetone (63 mL)/water (7.8 mL) (8: 1) at room temperature was added N-methyl morpholine N-oxide (2.48 g, 21.16 mmol). After 2 minutes osmium tetroxide (4% in water) (3.37 mL) was added and the resulting mixture stirred at room temperature for 23h. The reaction mixture was then quenched by the addition of aqueous Na2S203 (0.2 M, 25 mL) and extracted with CH2C12 (2 x 50 mL). The combined organic extracts were washed with aqueous Na2S203 (0.2 M, 10 mL), dried (MgS04), filtered and evaporated in vacuo. The crude material was purified by flash chromatography eluting with EtOAc (17 – 100 %) in heptane to give a mixture of the title compounds as a yellow solid (1.31g, 57 %).

According to the analysis of related databases, 193751-54-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; BROMIDGE, Steven; BURCH, Jason; HEIFETZ, Alexander; KRULLE, Thomas; MONTALBETTI, Christian A.G.N.; PEI, Zhonghua; PEREZ-FUERTES, Yolanda; TRANI, Giancarlo; (223 pag.)WO2016/1341; (2016); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 193751-54-1 as follows. Safety of tert-Butyl cyclopent-3-en-1-ylcarbamate

To a stirred suspension of LiAlH4 (3.74 g, 0.09852 mol) in 200 ml anhydrous THF in a two neck RBF (IL), was added a solution of 514 (10 g, 0.04926 mol) in 70 mL of THF slowly at 0 C under nitrogen atmosphere. After complete addition, reaction mixture was warmed to room temperature and then heated to reflux for 4 h. Progress of the reaction was monitored by TLC. After completion of reaction (by TLC) the mixture was cooled to 0 C and quenched with careful addition of saturated Na2SO4 solution. Reaction mixture was stirred for 4 h at room temperature and filtered off. Residue was washed well with THF. The filtrate and washings were mixed and diluted with 400 mL dioxane and 26 mL conc. HCl and stirred for 20 minutes at room temperature. The volatilities were stripped off under vacuum to furnish the hydrochloride salt of 515 as a white solid. Yield: 7.12 g 1H-NMR (DMSO, 400 MHz): delta=9.34 (broad, 2H), 5.68 (s, 2H), 3.74 (m, 1H), 2.66-2.60 (m, 2H), 2.50-2.45 (m, 5H).

According to the analysis of related databases, 193751-54-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Alnylam Pharmaceuticals, Inc.; Fitzgerald, Kevin; Butler, James; Bettencourt, Brian; Borodovsky, Anna; Kuchimanchi, Satyanarayana; Charisse, Klaus; Manoharan, Muthiah; Maier, Martin; Rajeev, Kallanthottathil G.; Foster, Donald; US2015/247143; (2015); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 193751-54-1, name is tert-Butyl cyclopent-3-en-1-ylcarbamate, A new synthetic method of this compound is introduced below., category: amides-buliding-blocks

(0243) To a stirred suspension of LiAlH4 (3.74 g, 0.09852 mol) in 200 ml anhydrous THF in a two neck RBF (1 L), was added a solution of 514 (10 g, 0.04926 mol) in 70 mL of THF slowly at 0 C. under nitrogen atmosphere. After complete addition, reaction mixture was warmed to room temperature and then heated to reflux for 4 h. Progress of the reaction was monitored by TLC. After completion of reaction (by TLC) the mixture was cooled to 0 C. and quenched with careful addition of saturated Na2SO4 solution. Reaction mixture was stirred for 4 h at room temperature and filtered off. Residue was washed well with THF. The filtrate and washings were mixed and diluted with 400 mL dioxane and 26 mL conc. HCl and stirred for 20 minutes at room temperature. The volatilities were stripped off under vacuum to furnish the hydrochloride salt of 515 as a white solid. Yield: 7.12 g 1H-NMR (DMSO, 400 MHz): delta=9.34 (broad, 2H), 5.68 (s, 2H), 3.74 (m, 1H), 2.66-2.60 (m, 2H), 2.50-2.45 (m, 5H). (0244) Synthesis of 516:

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Alnylam Pharmaceuticals, Inc.; Novobrantseva, Tatiana; Bettencourt, Brian; Milstein, Stuart; Borodovsky, Anna; US9127275; (2015); B2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 193751-54-1, name is tert-Butyl cyclopent-3-en-1-ylcarbamate, A new synthetic method of this compound is introduced below., Computed Properties of C10H17NO2

Example 32Synthesis of cis-(6-oxa-bicyclo[3.1.0]hex-3-yl)-carbamic acid tert-butyl ester (IV-2)Solid NaHCO3 (0.0167 mol) and m-CPBA (0.0128 mol) were added in portions to a stirred solution of cyclopent-3-enyl-carbamic acid tert-butyl ester IV-1 (0.0093 mol) in CH2Cl2 (60 mL). The mixture was stirred at 0 C for the first 2 h of the reaction and then allowed to stir for about 48 h at room temperature. Aqueous 20% Na2SO3 (30 mL) was added, and the two layers were separated. The aqueous layer was extracted with CH2Cl2 (20 mL x 3), and the combined organic layers were washed with 20% Na2SO3 (30 mL x 1), 5 % NaHCO3 (30 mL x 1), and water (30 mL x 1 ). The combined organic phase was concentrated in vacuo, and the residue was purified by column chromatography (silica gel, 100% dichloromethane) to give pure product as a colorless oil (64%).

The synthetic route of 193751-54-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NORTHWESTERN UNIVERSITY; SILVERMAN, Richard, B.; JI, Haitao; LAWTON, Graham, R.; WO2008/42353; (2008); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 193751-54-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 193751-54-1, name is tert-Butyl cyclopent-3-en-1-ylcarbamate, This compound has unique chemical properties. The synthetic route is as follows.

6.63 g of mCPBA (70%) was added at 0C to a solution of 4.7 g of N-Boc-cyclopent-3-enyl amine in 80 mL of DCM. The solution obtained was stirred at rt for 1.5 h, charged with 20 mL of 20% sodium thiosulfate, stirred for 10 min, DCM was added, phases obtained were separated and the organic layer obtained was washed with saturated NaHC03 solution. The aqueous layer obtained was extracted twice with DCM, the combined organic layers obtained were dried over magnesium sulfate and solvent was evaporated. 5.2 g of the crude product was obtained which was recrystallized twice from heptane. 917 mg of syn epoxide was obtained in the form of white needles. The mother liquors obtained were subjected to chromatography (silica, toluene/EtOAc = 9: 1 – 7: 1). 3.51 g of anti epoxide in the form of a white amorphous solid was obtained.Syn epoxide: NMR (400MHz, DMSO-d6, delta, ppm, characteristic signals): 1.36 (s, 9H), 6.79 (d, 1H, J=8Hz), 1.47 (dd, 1H, J=8Hz and 14Hz), 2.17 (dd, 1H, J=8Hz and 14Hz), 3.44 (s, 2H), 3.54 (m, 1H). MS-ESI+ (m/z): 200 (M + H). TLC: toluene/EtOAc = 3:1, Rf = 0.4.Anti epoxide: 1H NMR (400MHz, DMSO-d6, delta, ppm, characteristic signals): 1.35 (s, 9H), 1.78 (d, 2H, J=15Hz), 1.98 (dd, 1H, J=8Hz and 15Hz), 3.51 (s, 2H), 3.89 (q, 1H, J=8 and 16Hz), 5.70 (d, 1H, J=8Hz). MS-ESI+ (m/z): 200 (M + H). TLC: toluene/EtOAc = 3: 1, Rf = 0.45.

The chemical industry reduces the impact on the environment during synthesis tert-Butyl cyclopent-3-en-1-ylcarbamate. I believe this compound will play a more active role in future production and life.

Reference:
Patent; NABRIVA THERAPEUTICS AG; RIEDL, Rosemarie; THIRRING, Klaus; HEILMAYER, Werner; WO2012/31307; (2012); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

These common heterocyclic compound, 193751-54-1, name is tert-Butyl cyclopent-3-en-1-ylcarbamate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C10H17NO2

Solid NAHCO3 (0.0167 mol) and M-CPBA (0. 0128 mol) were added in portions to a stirred solution of cyclopent-3-enyl-carbamic acid tert-butyl ester IV-1 (0.0093 mol) in CH2C12 (60 mL). The mixture was stirred at 0 C for the first 2 h of the reaction and then allowed to stir for about 48 h at room temperature. Aqueous 20% NA2S03 (30 mL) was added, and the two layers were separated. The aqueous layer was extracted with CH2C12 (20 mL X 3), and the combined organic layers were washed with 20% NA2SO3 (30 mL X 1), 5 % NAHCO3 (30 mL X 1), and water (30 mL X 1). The combined organic phase was concentrated in vacuo, and the residue was purified by column chromatography (silica gel, 100% dichloromethane) to give pure product as a colorless oil (64%).

The synthetic route of tert-Butyl cyclopent-3-en-1-ylcarbamate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NORTHWESTERN UNIVERSITY; WO2005/26111; (2005); A2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics