Category: 147751-16-4

Electric Literature of 147751-16-4, These common heterocyclic compound, 147751-16-4, name is tert-Butyl methylsulfonylcarbamate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Boc-N-methanesulfonamide (11.0 g, 56.3 mmol), trimethylphosphine (56.1 mL of a 1.0 M solution in tetrahydrofuran, 56.1 mmol), and a 40 wt. % solution of diethyl azodicarboxylate in toluene (25.6 mL, 56.0 mmol) were added sequentially to a solution of (4-benzylsulfanyl-5-nitro-thiophen-3-yl)-methanol (10.52 g, 37.4 mmol) in tetrahydrofuran (300 mL) at 25 C. The mixture was stirred for 3.5 h at 25 C., and then was concentrated in vacuo. Purification of the residue by flash column chromatography (Merck silica gel 60, 40-63 mum; 20% ethyl acetate in hexanes) afforded the desired product, Boc-N-(4-benzylsulfanyl-5-nitro-thiophen-3-ylmethyl)-methanesulfonamide (9.79 g, 21.3 mmol, 57%), as a dark brown oil. 1H NMR (400 MHz, CDCl3) delta: 1.50 (9H, s), 3.29 (3H, s), 4.19 (2H, s), 4.68 (2H, s), 7.15-7.18 (2H, m), 7.22-7.25 (3H, m), 7.40 (1H, s).

The synthetic route of 147751-16-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Anadys Pharmaceuticals, Inc.; US2012/316156; (2012); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Synthetic Route of 147751-16-4, These common heterocyclic compound, 147751-16-4, name is tert-Butyl methylsulfonylcarbamate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A l-L flask was charged with 2-(diethoxyphosphorylmethyl)-4-iodo-l- methoxy -benzene (5.0 g, 13 mmol), /e/V-butyl -methylsulfonylcarbamate (7.1 g, 36 mmol), cuprous iodide (2.5 g, 13 mmol), /VJV-dimethylglycine (1.4 g, 13 mmol) and potassium phosphate tribasic (11.4 g, 52.1 mmol) and the flask was purged with nitrogen. NN- Dimethylacetamide (43 mL) was then added and the flask was purged with nitrogen again, and an empty balloon was placed on top of the reaction vessel to allow room for gas generation. The reaction was stirred at 110 C for 16 hours. The resulting mixture was diluted with 10% glycine in water and acidified to pH 1 with 1N HC1, extracted with dichloromethane (3 x 50 mL), dried with anhydrous MgS04, concentrated under reduced pressure and purified by silica gel column chromatography (0% to 10% methanol in dichloromethane) to give the title compound as a white solid (922 mg, 20% yield). LCMS (ESI+) m/z 352 (M+H)+

The synthetic route of 147751-16-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GENENTECH, INC.; F. HOFFMANN-LA ROCHE AG; CUNNINGHAM, Christian; BEROZA, Paul Powell; CRAWFORD, James John; LEE, Wendy; RENE, Olivier; ZBIEG, Jason Robert; LIAO, Jiangpeng; WANG, Tao; YU, Chen; (208 pag.)WO2020/51099; (2020); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 147751-16-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 147751-16-4 as follows.

LiAlH4 (9.0 mL of a 1 M solution in THF, 9.0 mmol) was added dropwise to a suspension of 2-ethylpyridine-3-carboxylic acid (500 mg, 3.31 mmol) in THF (5 mL) under N2 with cooling in an ice bath. The resulting solution was stirred for 1 hour, then quenched by the careful addition of water (0.35 mL) then aqueous NaOH (0.25 mL of a 15% w/v solution) then water (1 mL). After stirring for 10 minutes the mixture was filtered and the filtrate concentrated in vacuo to give a colourless oil (250 mg); MS m/z: 138 (M+H)+. This material was dissolved in DCM (10 mL) and tert-butyl N-methylsulfonylcarbamate (630 mg, 3.23 mmol) and PPh3 (950 mg, 3.62 mmol) were added followed by DEAD (500 muL, 3.04 mmol). The reaction mixture was stirred at ambient temperature for 18 hours, then partitioned between EtOAc and saturated aqueous sodium bicarbonate solution. After stirring for 5 minutes the organic phase was isolated using a phase separation cartridge. The solvent was removed in vacuo and the residue purified by column chromatography (silica, DCM-EtOAc elution) to give an oil that was taken up in HCl (10 mL of a 3 M solution in MeOH). PtO2 (150 mg, 0.66 mmol) was added and the mixture shaken in a Parr hydrogenator for 18 hours under 60 psi of H2 pressure. The reaction mixture was poured onto a pre-wetted ion-exchange cartridge, washing with MeOH then eluting the product with 2 M methanolic NH3 solution. The filtrate was concentrated in vacuo to give N-((2-ethylpiperidin-3- yl)methyl)methanesulfonamide A74 as a colourless oil (70 mg) that was taken directly on to the next reaction without further purification; MS m/z: 221 (M+H)+.

According to the analysis of related databases, 147751-16-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK PATENT GMBH; VERTEX PHARMACEUTICALS INCORPORATED; BAYLY, Andrew; BLEICH, Matthew; CHARRIER, Jean-Damien; DODD, James; DURRANT, Steven; ENO, Meredith Suzanne; ETXEBARRIA I JARDI, Gorka; EVERITT, Simon; FRAYSSE, Damien; KELLY, Shazia; KNEGTEL, Ronald; MOCHALKIN, Igor; MORTIMORE, Michael; NORTH, Kiri; PORICHIS, Filippos; PULLIN, Robert; RUTHERFORD, Alistair; STORCK, Pierre-Henri; TWIN, Heather Clare; XIAO, Yufang; (1159 pag.)WO2019/148132; (2019); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 147751-16-4, These common heterocyclic compound, 147751-16-4, name is tert-Butyl methylsulfonylcarbamate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Boc-N-methanesulfonamide (11.0 g, 56.3 mmol), trimethylphosphine (56.1 mL of a 1.0 M solution in tetrahydrofuran, 56.1 mmol), and a 40 wt. % solution of diethyl azodicarboxylate in toluene (25.6 mL, 56.0 mmol) were added sequentially to a solution of (4-benzylsulfanyl-5-nitro-thiophen-3-yl)-methanol (10.52 g, 37.4 mmol) in tetrahydrofuran (300 mL) at 25 C. The mixture was stirred for 3.5 h at 25 C., and then was concentrated in vacuo. Purification of the residue by flash column chromatography (Merck silica gel 60, 40-63 mum; 20% ethyl acetate in hexanes) afforded the desired product, Boc-N-(4-benzylsulfanyl-5-nitro-thiophen-3-ylmethyl)-methanesulfonamide (9.79 g, 21.3 mmol, 57%), as a dark brown oil. 1H NMR (400 MHz, CDCl3) delta: 1.50 (9H, s), 3.29 (3H, s), 4.19 (2H, s), 4.68 (2H, s), 7.15-7.18 (2H, m), 7.22-7.25 (3H, m), 7.40 (1H, s).

The synthetic route of 147751-16-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Anadys Pharmaceuticals, Inc.; US2012/316156; (2012); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Related Products of 147751-16-4, These common heterocyclic compound, 147751-16-4, name is tert-Butyl methylsulfonylcarbamate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A l-L flask was charged with 2-(diethoxyphosphorylmethyl)-4-iodo-l- methoxy -benzene (5.0 g, 13 mmol), /e/V-butyl -methylsulfonylcarbamate (7.1 g, 36 mmol), cuprous iodide (2.5 g, 13 mmol), /VJV-dimethylglycine (1.4 g, 13 mmol) and potassium phosphate tribasic (11.4 g, 52.1 mmol) and the flask was purged with nitrogen. NN- Dimethylacetamide (43 mL) was then added and the flask was purged with nitrogen again, and an empty balloon was placed on top of the reaction vessel to allow room for gas generation. The reaction was stirred at 110 C for 16 hours. The resulting mixture was diluted with 10% glycine in water and acidified to pH 1 with 1N HC1, extracted with dichloromethane (3 x 50 mL), dried with anhydrous MgS04, concentrated under reduced pressure and purified by silica gel column chromatography (0% to 10% methanol in dichloromethane) to give the title compound as a white solid (922 mg, 20% yield). LCMS (ESI+) m/z 352 (M+H)+

The synthetic route of 147751-16-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GENENTECH, INC.; F. HOFFMANN-LA ROCHE AG; CUNNINGHAM, Christian; BEROZA, Paul Powell; CRAWFORD, James John; LEE, Wendy; RENE, Olivier; ZBIEG, Jason Robert; LIAO, Jiangpeng; WANG, Tao; YU, Chen; (208 pag.)WO2020/51099; (2020); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 147751-16-4 as follows. name: tert-Butyl methylsulfonylcarbamate

1.6 M n-Butyl lithium in hexanes (20.2 ml, 32.4 mmol) was added drop wise to a solution of N,N-diisopropylethylamine (5.91 ml, 33.9 mmol) in 25 ml dry THF in ice bath and stirred for 30 minutes. Then tert-butyl methylsulfonylcarbamate in 25 ml dry THF was added slowly and stirred at 0 C. for 1 hour. The mixture was then cooled to -78 C. and 4-phenoxy-2-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzaldehyde (3.01 g, 15.4 mmol) in 25 ml dry THF was added slowly. The reaction was slowly warmed up to room temperature and stirred at room temperature for 1 hour. Then it was quenched with water, acidified with 1N HCl to pH 3, extracted with ethyl acetate. The combined organic layer was then dried over Na2SO4, filtered and concentrated. Column purification gave 1 g product as off-white solid. 1H NMR (DMSO-d6, 300 MHz) delta ppm 11.34 (s, 1H), 9.39 (s, 1H), 7.54 (d, J=8.10 Hz, 1H), 7.42-7.37 (m, 2H), 7.28 (d, J=2.40, 1H), 7.22-7.12 (m, 2H), 7.03-7.01 (m, 2H), 5.43 (dd, J=9.3, 1.8 Hz, 1H), 4.01 (dd, J=13.5, 2.1 Hz, 1H), 3.54 (dd, J=14.7, 9.3 Hz, 1H), 1.42 (s, 9H). MS (ESI) m/z 418 [M-H]-.

According to the analysis of related databases, 147751-16-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Anacor Pharmaceuticals, Inc.; GlaxoSmithKline; US2010/256092; (2010); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 147751-16-4, name is tert-Butyl methylsulfonylcarbamate, belongs to amides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 147751-16-4, Recommanded Product: tert-Butyl methylsulfonylcarbamate

N-{l-[(lS,3R)-3-(2,2,2-Trifluoro-ethylamino)-cyclopentyl]-lH-imidazo[4,5-c]quinolin-2- ylmethyl} -methanesulfonamideN-tert-Butylcarbamate-N-{l-[(lS,3R)-3-(2,2,2-trifluoro-ethylamino)-cyclopentyl]-lH- imidazo[4,5-c]quinolin-2-ylmethyl} -methanesulfonamide A suspension of {l-[(lS,3R)-3-(2,2,2-trifluoro-ethylamino)-cyclopentyl]-lH-imidazo[4,5- c]quinolin-2-yl} -methanol (139 mg, 0.38 mmol) in anhydrous THF (3.8 mL), under an atmosphere of nitrogen was treated with tert-butyl N-methanesulfonylcarbamate (164 mg, 0.84 mmol), followed by triphenylphosphine (200 mg, 0.76 mmol) and then diisopropyl azodicarboxylate (150 mu?, 0.76 mmol). The reaction mixture was stirred at room temperature overnight. The mixture was diluted with EtOAc and water and the phases separated. The aqueous layer was extracted with EtOAc (2x) and the combined organic phases washed (brine), dried (sodium sulfate) and concentrated in vacuo to afford 780 mg of a yellow oil. Purification by column chromatography on an Isolute SCX-2 cartridge (eluting with MeOH and then 2M NH3 in MeOH) afforded 192 mg of a golden glassy solid. This was purified by filtration through a pad of silica gel (gradient: 0 to 2% [2M NH3 in MeOH] in EtOAc) to afford 169 mg (82%) of N-tert-butylcarbamate-N- { 1 – [( 1 S ,3R)-3 -(2,2,2-trifluoro-ethylamino)-cyclopentyl] – 1 H- imidazo[4,5-c]quinolin-2-ylmethyl}-methanesulfonamide as a colourless gum. LCMS (Method B, ESI): RT = 2.67 min, m+H = 542.0; 1H NMR (400 MHz, CDC13): delta 9.20 (s, 1 H), 8.40 (d, 1 H), 8.28 (d, 1 H), 7.66 (m, 2 H), 5.54-5.30 (m, 3 H), 3.68 (s, 3 H), 3.60 (m, 1 H), 3.30 (m, 2 H), 2.60 (m, 2 H), 2.33 (m, 1 H), 2.15 (m, 2 H), 1.98 (m, 1 H), 1.50 (s, 9 H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HURLEY, Christopher; KULAGOWSKI, Janusz; ZAK, Mark; WO2013/7768; (2013); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

These common heterocyclic compound, 147751-16-4, name is tert-Butyl methylsulfonylcarbamate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of tert-Butyl methylsulfonylcarbamate

To a solution of benzyl 4-(hydroxymethyl)-3,3-dimethyl-pyrrolidine-1-carboxylate (300 mg, 1.14 mmol), tert-butyl N-methylsulfonylcarbamate (330 mg, 1.7 mmol) and PPh3 (890 mg, 3.4 mmol) in THF (20 mL) was added DEAD (390 muL, 2.5 mmol) dropwise and the reaction mixture stirred at ambient temperature under N2 for 16 hours. The reaction mixture was concentrated in vacuo and the residue purified by column chromatography (silica, 0 to 50% EtOAc/PE gradient elution) to give benzyl 4-[[tert- butoxycarbonyl(methylsulfonyl)amino]methyl]-3,3-dimethyl-pyrrolidine-1-carboxylate as a colourless oil that was taken directly on to the next step; MS m/z: 441 (M+H)+.

The synthetic route of tert-Butyl methylsulfonylcarbamate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK PATENT GMBH; VERTEX PHARMACEUTICALS INCORPORATED; BAYLY, Andrew; BLEICH, Matthew; CHARRIER, Jean-Damien; DODD, James; DURRANT, Steven; ENO, Meredith Suzanne; ETXEBARRIA I JARDI, Gorka; EVERITT, Simon; FRAYSSE, Damien; KELLY, Shazia; KNEGTEL, Ronald; MOCHALKIN, Igor; MORTIMORE, Michael; NORTH, Kiri; PORICHIS, Filippos; PULLIN, Robert; RUTHERFORD, Alistair; STORCK, Pierre-Henri; TWIN, Heather Clare; XIAO, Yufang; (1159 pag.)WO2019/148132; (2019); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Some common heterocyclic compound, 147751-16-4, name is tert-Butyl methylsulfonylcarbamate, molecular formula is C6H13NO4S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: tert-Butyl methylsulfonylcarbamate

Example 243: t-ButylN-[4-[(4-chlorophenyl)sulfonyl]-4-(2,5-difluorophenyl)-3-methylbutyl]-N-methylsulfonylcarbamate The 4-[(4-chlorophenyl)sulfonyl]-4-(2,5-difluorophenyl)-3-methyl-1-butanol (97.2 mg, 0.259 mmol) obtained in Example 239, t-butyl N-methylsulfonylcarbamate (101 mg, 0.518 mmol) and triphenylphosphine (138 mg, 0.518 mmol) were dissolved in tetrahydrofuran (3 ml), followed by the addition of diisoopropyl azodicarboxylate (102 mul, 0.518 mmol) at room temperature.. The reaction mixture was stirred at room temperature for 18 hours.. The reaction mixture was diluted with ethyl acetate, washed with a saturated aqueous solution of ammonium chloride, water and brine, dried over magnesium sulfate and then concenetrated.. The residue thus obtained was subjected to flash chromatography on a silica gel column, and the fraction obtained from the hexane:ethyl acetate=3:2 elude was concentrated, whereby the title compound (136 mg, 0.246 mmol, 95%) was obtained as a colorless amorphous substance.1H-NMR (400 MHz, CDCl3) delta: 1.33(3H,d,J=6.8Hz), 1.35-1.45(1H,m), 1.52(9H,s), 1.99-2.08(1H,m), 2.70-2.78(1H,m), 3.27(3H,s), 3.65-3.76(2H,m), 4.45(1H,d,J=7.6Hz), 6.77(1H,td,J=9.0,4.6Hz), 6.91-6.97(1H,m), 7.32(2H,d,J=8.5Hz), 7.38-7.45(1H,m), 7.50(2H,d,J=8.5Hz). MS m/z: 552 (M++H), 574 (M++Na). FAB-MS: 552.1070 (Calcd for C23H29ClF2NO6S2: 552.1093), 574.0875 (Calcd for C23H28ClF2NO6S2Na: 574.0912).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 147751-16-4, its application will become more common.

Reference:
Patent; DAIICHI PHARMACEUTICAL CO., LTD.; EP1466898; (2004); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Synthetic Route of 147751-16-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 147751-16-4 name is tert-Butyl methylsulfonylcarbamate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To a solution of terf-butyl methylsulfonylcarbamate (900 mg, 4.62 mmol), K2CO3 (1 .3 g, 9.63 mmol) in DMF (60 mL) was added 2-(chloromethyl)-6-(1 -(phenylsulfonyl)-l H-indol- 3-yl)benzo[d]oxazole (Intermediate 79, 1 .49 g, 3.52 mmol). The mixture was stirred at 50 C for 9 hrs. The reaction mixture was filtered. The filtrate was diluted with water (60 mL) and extracted with EtOAc (60 mLx3). The combined organic layer was washed with water (60 mLx3), dried over anhydrous Na2SO4 and filtered. The filtrate was concentrated and purified by silica gel chromatography (petroleum ether/ EtOAc =6/1 – 3/1 ) to afford 1 .25 g (61 %) of the title compound as a yellow solid. LC-MS for C28H27N3O7S2+H+ [M+H]+ : calcd. 582.1 ; found: 582.7. 1H NMR (400 MHz, DMSO-afe) delta [ppm]:8.22 (s, 1 H), 8.13 (d, J = 1 .1 Hz, 1 H), 8.11 (s, 1 H), 8.09 (d, J = 1 .3 Hz, 1 H), 8.05 (d, J = 8.3 Hz, 1 H), 7.89 (d, J = 7.9 Hz, 1 H), 7.85 (d, J = 8.3 Hz, 1 H), 7.76 (dd, J = 8.3, 1 .5 Hz, 1 H), 7.73 – 7.68 (m, 1 H), 7.61 (t, J = 7.7 Hz, 2H), 7.47 – 7.42 (m, 1 H), 7.39 – 7.34 (m, 1 H), 5.17 (s, 2H), 3.57 (s, 3H), 1 .43 (s, 9H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, tert-Butyl methylsulfonylcarbamate, and friends who are interested can also refer to it.

Reference:
Patent; ITEOS THERAPEUTICS; CAUWENBERGHS, Sandra; CROSIGNANI, Stefano; DRIESSENS, Gregory; DEROOSE, Frederik; (271 pag.)WO2015/140717; (2015); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics