Category: 116861-31-5

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 116861-31-5, name is tert-Butyl (3-chloropropyl)carbamate, A new synthetic method of this compound is introduced below., Recommanded Product: 116861-31-5

To a refluxing solution of hydrazine hydrate (6.40 g, 128.00 mmol) in ethanol (14.5 mL) was added a solution of tert-butyl 3-chloropropylcarbamate (9A) (3.80 g, 19.62 mmol) in ethanol (14.5 mL), dropwise over 80 min. The mixture stirred at reflux for 1 h. The reaction mixture was then evaporated and the residue diluted with diethyl ether (60 mL). The two layers were separated. The organic layer was washed with saturated sodium carbonate solution (17 mL) and evaporated to give tert-butyl 3-hydrazinylpropylcarbamate (10A) (1.60 g, 8.45 mmol, 43%) as a yellow oil. The crude material was used in the next step without further purification. ESMS m/z 190 (M+H)+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SOVA PHARMACEUTICALS, INC.; STEIN, Gregory; RAO, Srinivas, G.; DURON, Sergio, G.; CHAPMAN, Justin; SYDSERFF, Simon, G.; WO2014/18571; (2014); A2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Synthetic Route of 116861-31-5, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 116861-31-5 as follows.

Synthesis of compound 22: the aforementioned compound 20 (0.120 g, 0.00049 mol, 1 eq) was solubilised in DMF (3 ml). To the solution was added the aforementioned compound 21 (0.104 g, 0.00054 mol, 1.1 eq) solubilised in DMF (2 ml). The reaction mixture was stirred under reflux for 6 hours. The structure of the product was evaluated by TLC CH2Cl2 9/MeOH 1/NH4OHaq 33% 0.03. The solvent was evaporated, and the oily residue was purified by flash chromatography using a mixture of CH2Cl2 9/MeOH 1/NH4OHaq 33% 0.03 as the eluent phase. 0.084 mg of a yellow oil were obtained. Yield 42.71%. 1H NMR (400 MHz, CDCl3) delta 0.87 (d, 6H, J=6.8 Hz), 1.43 (s, 18H), 1.57-1.61 (m, 7H), 1.98-2.01 (m, 2H), 2.31-2.35 (m, 2H), 2.38-2.42 (m, 2H), 3.10-3.12 (m, 2H), 3.16-3.18 (m, 2H), 4.72 (brs, 1H, exch D2O), 5.69 (brs, 1H, D2O exch.).

According to the analysis of related databases, 116861-31-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Giuliani, Giammaria; Paus, Ralf; Benedusi, Anna; Marzani, Barbara; Baroni, Sergio; US2015/202132; (2015); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Synthetic Route of 116861-31-5, These common heterocyclic compound, 116861-31-5, name is tert-Butyl (3-chloropropyl)carbamate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 1 5-[(tert-butoxy)carbonyl]amino-2-ethoxycarbonyl-pentanoic acid ethyl ester (I: R1 =R2 =Et; R=–(CH2)3 –NHY; Y=Boc) Sodium metal (2.5 g, 0.1 mol) is dissolved in absolute ethyl alcohol (70 ml) while keeping the reaction mixture under nitrogen atmosphere. The temperature is then brought to 60 C. and malonic acid di-ethyl ester (35 g, 0.2 mol) is gradually dripped in. N-[(tert-butoxy)carbonyl]-3-chloro-propylamine (12.2 g, 0.1 mol) is gradually added, at room temperature, to the resulting solution. Stirring is continued at room temperature for 2 hours and then at the reflux temperature for 6 hours. The reaction mixture is poured into an ethyl acetate/water (1/1, v/v) mixture (400 ml) and the organic phase is recovered, washed several times with water and dried over MgSO4. The organic solvent is removed under vacuum (0.5 mBar) at 100 C., yielding a pale yellow oil (27.7 g, 87%), N.M.R. analysis of this product confirms the assigned structure.

The synthetic route of 116861-31-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Eniricerche S.p.A.; Sclavo S.p.A.; US4914226; (1990); A;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Synthetic Route of 116861-31-5, These common heterocyclic compound, 116861-31-5, name is tert-Butyl (3-chloropropyl)carbamate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 5-3 (40 mg, 97 pmol) and 19-1-1A (23 mg, 116 pmol) in DMF (300 uL) was added K2CO3 (27 mg, 194 pmol). The mixture was mixture was stirred at room temperature for 16 hr. The reaction cooled and diluted with DCM (5 mL). The solution was filtered and the filtrate was concentrated under reduced pressure. The crude was purified by flash column chromatography (ISCO, silica, l2g, ethyl acetate in hexanes) to afford 15 (18.9 mg, 34% yield).

Statistics shows that tert-Butyl (3-chloropropyl)carbamate is playing an increasingly important role. we look forward to future research findings about 116861-31-5.

Reference:
Patent; TP THERAPEUTICS, INC.; ROGERS, Evan W.; CUI, Jingrong Jean; ZHAI, Dayong; ZHANG, Han; UNG, Jane; DENG, Wei; WHITTEN, Jeffrey; (146 pag.)WO2019/126121; (2019); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Some common heterocyclic compound, 116861-31-5, name is tert-Butyl (3-chloropropyl)carbamate, molecular formula is C8H16ClNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 116861-31-5

[2-Amino-6-(4,5-difluoro-2-hydroxymethylphenyl)quinazolin-4-yl]-(1,3-dihydroisoindol-2-yl)methanone (?A64?) [0665] 100 mg of [2-amino-6-(4,5-difluoro-2-hydroxymethylphenyl)quinazolin-4-yl]-(1,3-dihydroisoindol-2-yl)methanone are dissolved in 3 ml of tetrahydrofuran together with 90 mg of tert-butyl (3-chloropropyl)carbamate. 2 ml of sodium hydroxide solution (32%) and 2 mg of tetrabutylammonium iodide are added, and the mixture is stirred at 80 C. for 16 h. The mixture is extracted 3 times with 5 ml of ethyl acetate. The combined organic phases are dried over sodium sulfate. After filtration, the filtrate is evaporated to dryness, the residue is taken up in 3 ml of dichloromethane, and 1 ml of 4N HCl in dioxane is added. After 1 h at 25 C., the mixture is evaporated to dryness in vacuo and purified by chromatography (reversed phase HPLC). [0666] Yield: 18 mg (16%) of {2-amino-6-[2-(3-aminopropoxymethyl)-4,5-difluorophenyl]quinazolin-4-yl}-(1,3-dihydroisoindol-2-yl)methanone; [0667] LC-MS retention time: 1.66 min.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 116861-31-5, its application will become more common.

Reference:
Patent; MERCK PATENT GESELLSCHAFT MIT BESCHRANKTER HAFTUNG; Eggenweiler, Hans-Michael; Sirrenberg, Christian; Buchstaller, Hans-Peter; US2013/178443; (2013); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 116861-31-5, The chemical industry reduces the impact on the environment during synthesis 116861-31-5, name is tert-Butyl (3-chloropropyl)carbamate, I believe this compound will play a more active role in future production and life.

[0095] Berbamine dihydrochloride (7.0 g, 10.28 mmol) is dissolved in N,N-dimethyl formamide (150 mL). Under nitrogen atmosphere, the solution is cooled to 0 C. After adding NaH (1.65 g, 60%, 41.12 mmol) into the solution, the mixture is stirred for 1 hour, then the solution of compound (8-2) (2.18 g, 11.3 mmol) in N,N-dimethyl formamide (30 mL) is added dropwise therein over 15 minutes. After being stirred for 1 hour at 0 C., the mixture is allowed to be warmed up to room temperature and is stirred for 3 hours, then is heated to 80 C. overnight. After vacuum evaporation, the reaction mixture is diluted with water and extracted with dichlorometbane (3*150 mL). The combined organic phase is washed with water and brine, dried through, anhydrous sodium sulfate and filtered. After vacuum concentration, the residue is purified by a preparative high performance liquid chromatography to give compound (8-3) (3.0 g, 38.1%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, tert-Butyl (3-chloropropyl)carbamate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; HANGZHOU BENSHENG PHARACEUTICALS CO., LTD.; Xu, Rongzhen; Xie, Fuwen; Lai, Hongxi; Rong, Frank; US2013/178470; (2013); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 116861-31-5, name is tert-Butyl (3-chloropropyl)carbamate, A new synthetic method of this compound is introduced below., Product Details of 116861-31-5

A mixture of 3.8 g (12.88 mmol) ethyl 7-bromo-3-hydroxynaphthalen-2-carboxylate, 3.0 g (15.5 mmol) 1-(tert.-butoxycarbonylamino)-3-chloropropane (prepared according to Helv. Chim. Acta 76 (1993), 1644), 2.0 g (14.5 mmol) potassium carbonate, and a catalytic amount of potassium iodide in 20 ml dry DMF was stirred at 90 C. for 6 h. It was poured into water, extracted three times with ethyl acetate, and the combined organic layers were washed three times with water, dried over sodium sulfate, and concentrated in vacuo. The intermediate was purified by chromatography on silica gel with toluene/acetone 9:1 to give 5.8 g (100%) of a yellow oil, which solidified rapidly upon standing.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Takeuchi, Kumiko; Jirousek, Michael Robert; Paal, Michael; Ruhter, Gerd; Schotten, Theo; US2004/9976; (2004); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 116861-31-5, name is tert-Butyl (3-chloropropyl)carbamate, A new synthetic method of this compound is introduced below., COA of Formula: C8H16ClNO2

To a refluxing solution of hydrazine hydrate (6.40 g, 128.00 mmol) in ethanol (14.5 mL) was added a solution of tert-butyl 3-chloropropylcarbamate (9A) (3.80 g, 19.62 mmol) in ethanol (14.5 mL), dropwise over 80 min. The mixture stirred at reflux for 1 h. The reaction mixture was then evaporated and the residue diluted with diethyl ether (60 mL). The two layers were separated. The organic layer was washed with saturated sodium carbonate solution (17 mL) and evaporated to give tert-butyl 3-hydrazinylpropylcarbamate (10A) (1.60 g, 8.45 mmol, 43%) as a yellow oil. The crude material was used in the next step without further purification. ESMS m/z 190 (M+H)+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SOVA PHARMACEUTICALS, INC.; STEIN, Gregory; RAO, Srinivas, G.; DURON, Sergio, G.; CHAPMAN, Justin; SYDSERFF, Simon, G.; WO2014/18571; (2014); A2;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Application of 116861-31-5, These common heterocyclic compound, 116861-31-5, name is tert-Butyl (3-chloropropyl)carbamate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

S1-1 (557 mg, 2.876 mmole, 1 equiv) was dissolved in 2 mL dry DMF under inert atmosphere. To this solution, potassium thioacetate (548 mg, 3.164 mmole, 1.1 equiv) was added as a powder to the stirring reaction mixture. The reaction was allowed to go overnight and monitored for completion by TLC and LC/MS. The reaction mixture was diluted with 20 mL EtOAc and transferred to a seperatory funnel. The organic layer was washed with 3 X 20 mL saturated NaCl solution. The organic layer was dried over Na2SO4, filtered, and evaporated to dryness to afford a crude yellow oil (MW: 233.33 g/mol, 400 mg, 60% yield), which was of sufficient purity for the next step.1H NMR (400 MHz, CDCl3): 3.12 (m, 2H), 2.86 (t, J = 7.0 Hz, 2H), 2.3 (s, 3H), 1.71 (m, 2H), 1.40 (s, 9H).

The synthetic route of 116861-31-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF CALIFORNIA; SHOKAT, Kevan, M.; GENTILE, Daniel; MOSS, Steven; (380 pag.)WO2018/112420; (2018); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics

Electric Literature of 116861-31-5, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 116861-31-5 as follows.

Synthesis of compound 22: the aforementioned compound 20 (0.120 g, 0.00049 mol, 1 eq) was solubilised in DMF (3 ml). To the solution was added the aforementioned compound 21 (0.104 g, 0.00054 mol, 1.1 eq) solubilised in DMF (2 ml). The reaction mixture was stirred under reflux for 6 hours. The structure of the product was evaluated by TLC CH2Cl2 9/MeOH 1/NH4OHaq 33% 0.03. The solvent was evaporated, and the oily residue was purified by flash chromatography using a mixture of CH2Cl2 9/MeOH 1/NH4OHaq 33% 0.03 as the eluent phase. 0.084 mg of a yellow oil were obtained. Yield 42.71%. 1H NMR (400 MHz, CDCl3) delta 0.87 (d, 6H, J=6.8 Hz), 1.43 (s, 18H), 1.57-1.61 (m, 7H), 1.98-2.01 (m, 2H), 2.31-2.35 (m, 2H), 2.38-2.42 (m, 2H), 3.10-3.12 (m, 2H), 3.16-3.18 (m, 2H), 4.72 (brs, 1H, exch D2O), 5.69 (brs, 1H, D2O exch.).

According to the analysis of related databases, 116861-31-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Giuliani, Giammaria; Paus, Ralf; Benedusi, Anna; Marzani, Barbara; Baroni, Sergio; US2015/202132; (2015); A1;,
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics