Quality Control of 2-(4-Aminophenyl)ethanol. Recently I am researching about WEAR BEHAVIOR; FRICTION; NANOCOMPOSITES; POLYIMIDE, Saw an article supported by the . Published in TAYLOR & FRANCIS INC in PHILADELPHIA ,Authors: Su, C; Xue, F; Xu, FL; Li, TS; Xin, YS; Wang, MM. The CAS is 104-10-9. Through research, I have a further understanding and discovery of 2-(4-Aminophenyl)ethanol
To improve the wear resistance of carbon fabric reinforced polyimide (CF/PI) composite, surface-modified graphene (MG) was synthesized and employed as a filler. The flexural strength, Rockwell hardness and thermal properties of the composites were tested. The composites were also evaluated for their tribological properties in a ring-on-block contact mode under dry sliding conditions. The results showed that the wear rate of MG reinforced CF/PI composites was reduced when compared to unfilled CF/PI composite. It was found that the 1 wt% MG filled CF/PI composites exhibited the optimal tribological properties. The worn surface, wear debris and transfer films were analyzed by scanning electron microscopy (SEM) and optical microscopy (OM) with the results helping to characterize the wear mechanism.
Quality Control of 2-(4-Aminophenyl)ethanol. Welcome to talk about 104-10-9, If you have any questions, you can contact Su, C; Xue, F; Xu, FL; Li, TS; Xin, YS; Wang, MM or send Email.
Reference:
Amide – Wikipedia,
,Amide – an overview | ScienceDirect Topics