Combined scouring and bleaching of cotton/linen blends by a near-neutral activated peroxide system was written by Li, Ling;Li, Qing. And the article was included in Fibres & Textiles in Eastern Europe in 2020.Recommanded Product: N,N-(Ethane-1,2-diyl)bis(N-acetylacetamide) This article mentions the following:
The simultaneous scouring and bleaching of cotton/linen blends was performed in a near-neutral activated peroxide system (pH = 7.2). A response surface quadratic model (RSQM) based on the central composite design (CCD) was established to investigate and optimize the bleaching performance. Research results showed that hydrophobic impurities in the blends had little impact on the bleaching. Temperature was the most significant factor affecting the fabric’s whiteness index (WI), followed by the concentration and duration of the activator tetraacetylethylenediamine (TAED). The optimized process was performed at 70°C for 40 min, incorporating 20 mmol/l of TAED and 42 mmol/l of H2O2. Compared with the conventional process carried out at 95°C for 60 min and adding 80 mmol/l H2O2, the activation process provided the fabric with comparable WI and wettability, a smoother and cleaner microcosmic surface, as well as the advantages of saving energy and preserving fabric. This study confirmed the feasibility of an efficient one-step process for neutral scouring and bleaching. In the experiment, the researchers used many compounds, for example, N,N-(Ethane-1,2-diyl)bis(N-acetylacetamide) (cas: 10543-57-4Recommanded Product: N,N-(Ethane-1,2-diyl)bis(N-acetylacetamide)).
N,N-(Ethane-1,2-diyl)bis(N-acetylacetamide) (cas: 10543-57-4) belongs to amides. Amides are pervasive in nature and technology. Proteins and important plastics like Nylons, Aramid, Twaron, and Kevlar are polymers whose units are connected by amide groups (polyamides); these linkages are easily formed, confer structural rigidity, and resist hydrolysis. Amides can be recrystallised from large quantities of water, ethanol, ethanol/ether, aqueous ethanol, chloroform/toluene, chloroform or acetic acid. The likely impurities are the parent acids or the alkyl esters from which they have been made. The former can be removed by thorough washing with aqueous ammonia followed by recrystallisation, whereas elimination of the latter is by trituration or recrystallisation from an organic solvent.Recommanded Product: N,N-(Ethane-1,2-diyl)bis(N-acetylacetamide)
Referemce:
Amide – Wikipedia,
Amide – an overview | ScienceDirect Topics